Terrain and walls
On a battle map, terrain and walls say where people can stand and what stops them. Without them, the whole map is open ground: the GM can put someone inside the rock around a cave or walk them through the wall of the next room. With them, every move in a scene is walked around what is in the way, and the GM is told how far the walk really was and what ground it crossed. Players never see your terrain or walls. They see the map's picture, and the GM plays by what you marked.
Terrain and walls matter most on a scene map with a square grid and a scale, where people move square by square. They work on any map, but on a travel map, where every move is a journey, they rarely help.
Terrain
The whole map is ground people can stand on unless terrain says otherwise. Each terrain region is one kind of ground and everywhere it is painted, in as many pieces as you like.
- Impassable is built into every map: ground nobody can stand on, the edges of the scene where nobody is ever placed, such as the sea around an island, a cliff drop, the rock around a cave or a chasm. It needs no setting up. A building isn't impassable: it is a place of its own (building a map).
- Your own kinds are for anything else: "Water", "Rubble", "Lava", "Old Campfire". You make each kind once for the map, with a name the GM reads, a colour that shows it in the editor, whether people can walk on it (normal ground, or impassable like the built-in kind) and its effect.
- The effect is two or three short sentences (at most 240 characters) saying what the ground does to whoever walks on or stands in it, which the GM reads when someone crosses it or stops there: "Waist-deep and freezing: moving through it costs double, and a Con save each turn or lose 1d4 hit points." Ground that slows people says so here; there is no separate setting for it.
Use one impassable region, and one region per kind of your own. On a square grid, paint whole squares, so a square is plainly in or out.
To add or change one, use the Terrain tool (G).
Walls
A wall is a line nobody can walk through: the walls between rooms, a fence, a cliff edge. Draw walls along the edges of rooms with their points on grid corners, and leave a gap where people should pass. A doorway is a gap in the wall: there are no doors yet, so nothing opens or shuts. Walls have no names, and they don't block sight.
To add or change one, use the Walls tool (W).
The Terrain tool (G) opens a bar above the tools: which kind to add (Impassable or one of your own), a gear for the terrain settings, the brush size, Erase and Done. Drag over squares to add the kind; Shift-drag, or turn on Erase, to take squares away. ⌘-click (Ctrl-click on Windows) picks the kind already under the pointer. To outline a region instead, pick a shape tool and choose Draw as: Terrain. Make your own kinds under Terrain & walls in Map settings with New terrain type; that section also counts the map's regions and walls.
The Walls tool (W) places a point at each click; double-click or press Enter to finish the wall. Points snap to grid corners and to the ends of other walls; hold Alt (Option) to place them freely. Click a wall to drag its points, or press Delete to remove it. The On this map list locks and removes walls too.
Terrain and walls are hidden in the editor until you show them with the terrain button among the view buttons, and they always show while the Terrain or Walls tool is on. Each map remembers whether you left its terrain showing.
How the GM uses them
Every move in a scene is walked on the map before it is shown and saved:
- Someone sent into solid ground (rock, a pillar, a kind people can't walk on) stands at the nearest open ground they can reach instead, and the GM is told where.
- A move with no way through (a sealed room, a cave with no tunnel out) doesn't happen, and the GM is told why.
- A walk around a wall is measured the long way. The GM hears how far the walk really was, beside the straight line, what it went round, and the ground it crossed on the way.
- Walks go round ground with an effect, such as lava or a burning campfire, when there's another way.
- The GM always knows what ground someone ends a move on, by its name and its effect, and is told when someone walks off ground whose effect stops applying.
- Before anyone moves, the GM is told the map's terrain and walls when the party arrives, so it places people only where they can stand.
- A flight or a teleport isn't walked: it goes over walls and rock, and only lands on open ground.
The player's own moves on the play map are walked the same way: a token walks around walls instead of through them, and a move with no way there is refused. Whether a walk is too far for one turn, and what an effect does to someone, is left to the GM. Nothing reads a character's speed, and nothing applies an effect for it.
Doing it well
- Mark the edges. Paint impassable ground where the picture's ground ends (the shoreline, a cliff's lip, a cave wall) and draw walls along the rooms' edges, so the map you play on and the map people see agree. Leave beaches, piers and every spot people stand on open.
- Leave the gaps. Every doorway, arch and breach is a gap in the wall. A room with no gap can't be entered or left on foot.
- Name your kinds as players would. "Shallow ford", "Lava", "Thorn thicket": the GM reads the name as what the ground is.
- Write the effect as a rule. What happens, to whom and when, with the numbers your system uses. Leave out what the picture already shows.
- Keep it to battle maps. A region or a city plays as travel, where terrain changes little.
Reference
Terrain and wall fields
terrain
Where people can't stand and what the ground is like: each region one kind of ground.
| Field | Type | Required | Default | What it is |
|---|---|---|---|---|
terrain |
object[] |
[] |
||
terrain.id |
string |
yes | The region's own id, unique on this map. | |
terrain.type |
"impassable" | "custom" |
yes | The kind of region: impassable (where nobody can stand) or custom (a kind of ground the map defines). | |
terrain.shape |
((({ x, y })[])[])[] |
yes | Where it is painted; empty while the kind is defined but unpainted. | |
terrain.label |
string |
A custom kind's name for the GM: "Water", "Rubble", "Glowing Pool". | ||
terrain.color |
string |
A custom kind's colour in the editor. Players never see it. | ||
terrain.movement |
"normal" | "blocked" |
Whether people can walk on a custom kind; plain ground when unset. | ||
terrain.note |
string |
What the GM should know when someone stands here, in two or three short sentences: "Still burning: 1d4 fire on entering or ending a turn here." | ||
terrain.locked |
boolean |
Locked in place, so it can't be painted over or removed by mistake. |
{
"terrain": [
{ "type": "impassable", "shape": [[[{ "x": 0.4, "y": 0.4 }, { "x": 0.45, "y": 0.4 }, { "x": 0.45, "y": 0.45 }, { "x": 0.4, "y": 0.45 }]]] },
{ "type": "custom", "label": "Glowing Pool", "color": "#14b8a6", "movement": "normal", "note": "Shallow and slow: moving through it costs double. DC 12 Con save or poisoned.", "shape": [[[{ "x": 0.6, "y": 0.5 }, { "x": 0.7, "y": 0.5 }, { "x": 0.7, "y": 0.6 }]]] }
]
}
shape is a list of pieces. Each piece is its outer ring first, then any
holes cut out of it; each ring is three or more points, and its last
point joins back to its first. An empty shape ([]) is a kind you have
defined but not painted yet. label, color, movement and note are
for a custom kind; the built-in impassable kind needs none of them, and
movement left out is normal ground. On a square grid, put corners on
grid lines so whole squares are in or out.
walls
Lines nobody can walk through.
| Field | Type | Required | Default | What it is |
|---|---|---|---|---|
walls |
({ id, points, locked? })[] |
[] |
||
walls.id |
string |
yes | The wall's own id, unique on this map. | |
walls.points |
({ x, y })[] |
yes | The line's points in order, at least two: put them on grid corners. | |
walls.locked |
boolean |
Locked in place, so it can't be dragged or removed by mistake. |
{
"walls": [
{ "points": [{ "x": 0.5, "y": 0.2 }, { "x": 0.5, "y": 0.45 }] },
{ "points": [{ "x": 0.5, "y": 0.5 }, { "x": 0.5, "y": 0.6 }] }
]
}
These two walls leave a gap between 0.45 and 0.5 down the map: a doorway.
See also: map settings for the grid, and tokens for who stands on the map.